Female Base Mesh  by Eugene Fokin

COST
$0

Female Base Mesh

This Female Base Mesh was created and generously donated by Eugene Fokin.

Based on a low poly anatomically correct human female body, this download contains 2 x .OBJ and 2 x .ZTL  (with and without T-Pose) and is a perfect starting point for any female character model.

Created in Zbrush 4R6 (compatible with R5), both RAW .OBJ and .ZTL files have no layers or varying Subdivision levels.

For information regarding Eugene, please visit his website: http://3dcutie.com

PLEASE NOTE: Files created in a newer version of ZBrush may not be opened by any earlier version of the Software. Click Here for more information.

This 3d model is an artistic representation of the subject matter. BadKing does not endorse and is not endorsed by the manufacturer of the subject matter.

136 Responses to Female Base Mesh by Eugene Fokin
  1. avatar
    24/06/2016 at 6:24 am

    Can I use this model for character development for a gaming app project which I plan to sell? Do I need to get a license? Thank you.

  2. avatar
    31/10/2015 at 2:39 am

    This is a really excellent base mesh. Not too detailed, just clean primary forms and excellent even topology. Now just to find a male version!

  3. avatar
    23/08/2015 at 5:20 am

    Hello. Thank you for making this. I’ve just purchased Zbrush last night and have been looking for a base to work off from. I’m a complete newb, though, so I’m afraid I’d have to ask – How do I install this file? Do I just copy the ZTL and OBJ files into the “Ztools” folder?

    • avatar
      27/08/2015 at 7:06 pm

      Hi :) In the top right-hand corner click on the “Load Tool” button, navigate to the .ZTL and open it. Then click and drag-out onto the canvas until you can see your model. Before you do anything else, click on the small ‘Edit” button near the top left corner and then you can start sculpting.

      If you want to import the .OBJ, click on the ‘Import’ button (top right-hand corner), please note if you already have a model loaded in the scene it will be replaced by the .OBJ so be careful. I hope this helps :)

      Hope this helps 😉

  4. avatar
    10/08/2015 at 2:19 pm

    hi thaks for sharin, im new in 3d and i have a problem, i open it in maya looks good but when i press 3 for smooth it shows alot of vertex broken and yyou can see some holes beetwen some faces, i tried to merge them and seems broken, can you help me

    • avatar
      12/08/2015 at 12:10 pm

      Hi, Unfortunately I don’t use Maya but I have opened the file in 3ds Max and Zbrush, both applications seem to be displaying the model without any issues. Have you tried opening it in Zbrush and use GoZ to bring it into Maya?

  5. avatar
    30/06/2015 at 10:54 am

    Thanks

  6. avatar
    12/06/2015 at 12:01 pm

    thank

  7. avatar
    19/05/2015 at 6:11 am

    thanks!

  8. avatar
    22/04/2015 at 4:53 pm

    Thank you so much you just saved my life lol

  9. avatar
    14/04/2015 at 11:58 am

    Thank you for donating this model!

  10. avatar
    14/03/2015 at 12:58 pm

    how can i download this mesh..

    • avatar
      16/03/2015 at 8:52 am

      Click on the red ‘Add to Cart’ button and proceed through checkout. The mesh will come up with a $0 value. Hope this helps!

  11. avatar
    05/02/2015 at 8:12 pm

    Great base mesh.
    Thank you!

    • avatar
      12/02/2015 at 7:19 am

      Cheers mate, all thanks to Eugene for this one :) Thanks for the support!

  12. avatar
    21/01/2015 at 7:15 pm

    Huge thanks to Eugene & Badking.

  13. avatar
    30/12/2014 at 8:45 pm

    good~~

  14. avatar
    19/12/2014 at 7:11 pm

    Hello, brush in which folder below?

    • avatar
      23/12/2014 at 6:09 pm

      Sorry I’m not sure what you mean. Can you send me a screenshot of what you’re after?

  15. avatar
    16/12/2014 at 10:30 pm

    Thaks

  16. avatar
    16/12/2014 at 9:29 pm

    Thanks for that use full mesh

  17. avatar
    12/12/2014 at 4:43 pm

    Thank U !!!!!!!!

  18. avatar
    10/12/2014 at 4:59 pm

    Help, I’m new to Zbrush. How do I import it to use. Seems my 4R6 will only open zbr. files. How do I open ztr. files?

  19. avatar
    06/12/2014 at 1:54 am

    thank you, really nice meshes you’ve shared!

  20. avatar
    27/11/2014 at 9:17 pm

    merci

  21. avatar
    23/11/2014 at 4:01 am

    Thank you!

  22. avatar
    21/11/2014 at 8:44 pm

    Thank you very much!

  23. avatar
    24/09/2014 at 4:12 am

    how can I download this files..:(?

    • avatar
      24/09/2014 at 2:48 pm

      You need to select the files you want to download by clicking on the big red “Add to Cart” button, then simply click the “Go to Cart” option and “Proceed to Checkout”.

      Hope this helps :)

  24. avatar
    15/09/2014 at 11:29 pm

    Love it+++

  25. avatar
    02/08/2014 at 5:46 pm

    So grateful for this! Thank you Eugene!!

  26. avatar
    16/07/2014 at 9:19 am

    Nevermind guys, the problem was from my browser lol! it’s fixed now and the website is responding. Sorry if I had caused any trouble ^_^

  27. avatar
    15/07/2014 at 6:05 am

    Hello, I can’t seem to be able to download this. The page freezes when I click on the link from the downloads list, is this normal? has the link expired? has this resource become unavailable?

  28. avatar
    10/07/2014 at 11:26 pm

    It is fo free? I can’t believe, thank you very much. If i wasn’t so poor, i’d donate money for site, but unfortunately..

  29. avatar
    07/07/2014 at 2:28 am

    beautiful

  30. avatar
    07/06/2014 at 10:20 am

    Спасибо большое! Творческих Успехов Вам!

  31. avatar
    30/05/2014 at 2:04 pm

    Thanks Alot! I just started using ZBrush and this will help so much. At this point i’m trying to make a 3d model of my wife.

    • avatar
      01/06/2014 at 9:24 am

      Sounds great! Would love to see the end result if you’re keen to share :)

  32. avatar
    24/05/2014 at 10:30 pm

    omg I LOVE YOU!

  33. avatar
    13/05/2014 at 11:58 pm

    Perfect! thank you!

  34. avatar
    08/05/2014 at 4:53 pm

    Thank you so much ^_^

  35. avatar
    02/05/2014 at 1:11 pm

    This may well be the most beautiful, natural female mesh I’ve ever seen. Thanks..!

  36. avatar
    28/04/2014 at 2:03 pm

    Beautiful proportions thank you !

  37. avatar
    28/04/2014 at 12:45 am

    Cool ! … Thanks man

  38. avatar
    25/04/2014 at 1:53 am

    Nice work, thank you

  39. avatar
    20/04/2014 at 2:53 am

    Gracias tío!

    • avatar
      22/04/2014 at 9:53 am

      Anytime and huge thanks to Eugene for his awesome Base Mesh!!!

  40. avatar
    10/04/2014 at 5:30 am

    Странноватая детализация. Половые губы сделал, а пальцы на ногах, нет.
    И это…может я что-нибудь неправильно импортнул в 3ds max…но, у неё между ягодиц
    находится непонятный кусок геометрии ромбической формы. Просто отдельным элементом.
    ————-
    И, конечно, я благодарен за модельку.

  41. avatar
    28/03/2014 at 4:06 am

    Gracias

  42. avatar
    20/03/2014 at 2:47 am

    BADKING is awesome !!

  43. avatar
    19/03/2014 at 1:27 am

    Started watching BadKing because he’s plain brilliant and has an accent I actually CAN understand. Now, you are my hero good sir. Eugene too, of course!

    Finally a female mesh not suffering from extreme dimorphism…

    • avatar
      19/03/2014 at 7:26 am

      LOL thanks so much mate :) I’m hoping to get some more of my own tutorials out again in a few months!

  44. avatar
    17/03/2014 at 12:48 am

    Nice mesh, so hard to find a female base mesh that isn’t ridiculously stylized

  45. avatar
    14/03/2014 at 9:46 am

    Thank you so much! *high five*

  46. avatar
    09/03/2014 at 10:18 pm

    Great model!Thanks very much!

  47. avatar
    21/02/2014 at 12:43 am

    beautiful mesh!! a beautiful realistic famale body! thank you for uploading this!!!

  48. avatar
    03/02/2014 at 10:51 pm

    thank you

  49. avatar
    23/12/2013 at 5:53 pm

    Thank you very much.

  50. avatar
    13/12/2013 at 3:25 pm

    Thanks!

  51. avatar
    02/12/2013 at 11:33 am

    Thanks guys!

  52. avatar
    10/11/2013 at 1:48 pm

    nice mesh, very nice mesh:)

  53. avatar
    30/10/2013 at 11:25 am

    Downloading as I type, Cant wait to get my digital hands on it….Kinky!! Cheers Eugene for the awesome model and the BK for hosting it!!!!

  54. avatar
    02/10/2013 at 2:53 am

    Grate Mesh i wanted it for animation too bad is useless for animation :(,if some one cold help me with a similar mesh but in T pose i whould be grateful
    Thanks

    • avatar
      02/10/2013 at 7:10 pm

      Is it the topology or the T pose that concerns you?

    • avatar
      02/10/2013 at 10:25 pm

      the t pose,if you use maya or anny other 3d program you will see that the armpit topology intercalate
      therefore is impossible or extremely hard to rig

      • avatar
        02/10/2013 at 11:13 pm

        I’ve updated the download… try now 😉

        • avatar
          04/10/2013 at 12:20 am

          Thaks,Zbrush is not my cup of tea :) btw will you guy’s make a more athletic mesh in the future?

          • avatar
            04/10/2013 at 9:07 pm

            Sure… Why not 😉

  55. avatar
    24/09/2013 at 8:52 pm

    @BadKing:

    Looking forward to it! :)

  56. avatar
    24/09/2013 at 5:28 pm

    Such a great female model. Thanks a lot BK and Eugene! :*

    • avatar
      24/09/2013 at 5:49 pm

      Thanks :) Keep your eye out tomorrow, releasing another female base mesh I’m sure you’ll like.

  57. avatar
    23/09/2013 at 1:18 pm

    Wow! Thank you!

  58. avatar
    18/09/2013 at 12:16 pm

    Thanks Eugene and Bad King – seen Eoff working on his lady for quiet a while, lovely base model with natural face.

  59. avatar
    18/09/2013 at 1:02 am

    Thank you Eugene and Badking !

  60. avatar
    14/09/2013 at 11:03 pm

    Yeah, I do. I have like 7 meshes across the net (obj files) This is indeed good.

  61. avatar
    14/09/2013 at 3:00 am

    Great!!! Nice model

    • avatar
      14/09/2013 at 9:27 pm

      Cheers mate :) It’s great to have some of Eugene’s work in our library!

  62. avatar
    13/09/2013 at 12:58 pm

    Another base mesh to my library, nice!

  63. avatar
    12/09/2013 at 9:59 pm

    much thanks Eugene

  64. avatar
    12/09/2013 at 4:29 am

    Big THANK YOU to Eugene Fokin :) ! And to you Badking 😀 !
    Excellent!

  65. avatar
    11/09/2013 at 8:56 pm

    Soooooooooooooooooooooo thankful to BadKing and Eugene…you guys rock 😛

  66. avatar
    11/09/2013 at 8:04 pm

    Useful base mesh.Thanks !

  67. avatar
    11/09/2013 at 8:41 am

    I know zbrush comes with a few base meshes but I feel like the female ones are lacking. Thank you so much for this beautiful, clean base mesh! I can’t wait to sculpt on it. -jason

    • avatar
      11/09/2013 at 11:06 am

      I’ve been thinking about sculpting a female character for a while, now that I’ve got this it’ll be alot easier! And I get to share it with you guys, extra bonus :) Kudos to Eugene!

  68. avatar
    11/09/2013 at 5:44 am

    Thanks ! :)

    • avatar
      11/09/2013 at 7:29 am

      Cheers! Huge thanks to Eugene for sharing his work with the rest of the community :)

Leave a Reply

You must be logged in to post a comment.

Female Base Mesh

This Female Base Mesh was created and generously donated by Eugene Fokin.

Based on a low poly anatomically correct human female body, this download contains 2 x .OBJ and 2 x .ZTL  (with and without T-Pose) and is a perfect starting point for any female character model.

Created in Zbrush 4R6 (compatible with R5), both RAW .OBJ and .ZTL files have no layers or varying Subdivision levels.

For information regarding Eugene, please visit his website: http://3dcutie.com

PLEASE NOTE: Files created in a newer version of ZBrush may not be opened by any earlier version of the Software. Click Here for more information.

This 3d model is an artistic representation of the subject matter. BadKing does not endorse and is not endorsed by the manufacturer of the subject matter.

136 Responses to Female Base Mesh by Eugene Fokin
  1. avatar
    24/06/2016 at 6:24 am

    Can I use this model for character development for a gaming app project which I plan to sell? Do I need to get a license? Thank you.

  2. avatar
    31/10/2015 at 2:39 am

    This is a really excellent base mesh. Not too detailed, just clean primary forms and excellent even topology. Now just to find a male version!

  3. avatar
    23/08/2015 at 5:20 am

    Hello. Thank you for making this. I’ve just purchased Zbrush last night and have been looking for a base to work off from. I’m a complete newb, though, so I’m afraid I’d have to ask – How do I install this file? Do I just copy the ZTL and OBJ files into the “Ztools” folder?

    • avatar
      27/08/2015 at 7:06 pm

      Hi :) In the top right-hand corner click on the “Load Tool” button, navigate to the .ZTL and open it. Then click and drag-out onto the canvas until you can see your model. Before you do anything else, click on the small ‘Edit” button near the top left corner and then you can start sculpting.

      If you want to import the .OBJ, click on the ‘Import’ button (top right-hand corner), please note if you already have a model loaded in the scene it will be replaced by the .OBJ so be careful. I hope this helps :)

      Hope this helps 😉

  4. avatar
    10/08/2015 at 2:19 pm

    hi thaks for sharin, im new in 3d and i have a problem, i open it in maya looks good but when i press 3 for smooth it shows alot of vertex broken and yyou can see some holes beetwen some faces, i tried to merge them and seems broken, can you help me

    • avatar
      12/08/2015 at 12:10 pm

      Hi, Unfortunately I don’t use Maya but I have opened the file in 3ds Max and Zbrush, both applications seem to be displaying the model without any issues. Have you tried opening it in Zbrush and use GoZ to bring it into Maya?

  5. avatar
    30/06/2015 at 10:54 am

    Thanks

  6. avatar
    12/06/2015 at 12:01 pm

    thank

  7. avatar
    19/05/2015 at 6:11 am

    thanks!

  8. avatar
    22/04/2015 at 4:53 pm

    Thank you so much you just saved my life lol

  9. avatar
    14/04/2015 at 11:58 am

    Thank you for donating this model!

  10. avatar
    14/03/2015 at 12:58 pm

    how can i download this mesh..

    • avatar
      16/03/2015 at 8:52 am

      Click on the red ‘Add to Cart’ button and proceed through checkout. The mesh will come up with a $0 value. Hope this helps!

  11. avatar
    05/02/2015 at 8:12 pm

    Great base mesh.
    Thank you!

    • avatar
      12/02/2015 at 7:19 am

      Cheers mate, all thanks to Eugene for this one :) Thanks for the support!

  12. avatar
    21/01/2015 at 7:15 pm

    Huge thanks to Eugene & Badking.

  13. avatar
    30/12/2014 at 8:45 pm

    good~~

  14. avatar
    19/12/2014 at 7:11 pm

    Hello, brush in which folder below?

    • avatar
      23/12/2014 at 6:09 pm

      Sorry I’m not sure what you mean. Can you send me a screenshot of what you’re after?

  15. avatar
    16/12/2014 at 10:30 pm

    Thaks

  16. avatar
    16/12/2014 at 9:29 pm

    Thanks for that use full mesh

  17. avatar
    12/12/2014 at 4:43 pm

    Thank U !!!!!!!!

  18. avatar
    10/12/2014 at 4:59 pm

    Help, I’m new to Zbrush. How do I import it to use. Seems my 4R6 will only open zbr. files. How do I open ztr. files?

  19. avatar
    06/12/2014 at 1:54 am

    thank you, really nice meshes you’ve shared!

  20. avatar
    27/11/2014 at 9:17 pm

    merci

  21. avatar
    23/11/2014 at 4:01 am

    Thank you!

  22. avatar
    21/11/2014 at 8:44 pm

    Thank you very much!

  23. avatar
    24/09/2014 at 4:12 am

    how can I download this files..:(?

    • avatar
      24/09/2014 at 2:48 pm

      You need to select the files you want to download by clicking on the big red “Add to Cart” button, then simply click the “Go to Cart” option and “Proceed to Checkout”.

      Hope this helps :)

  24. avatar
    15/09/2014 at 11:29 pm

    Love it+++

  25. avatar
    02/08/2014 at 5:46 pm

    So grateful for this! Thank you Eugene!!

  26. avatar
    16/07/2014 at 9:19 am

    Nevermind guys, the problem was from my browser lol! it’s fixed now and the website is responding. Sorry if I had caused any trouble ^_^

  27. avatar
    15/07/2014 at 6:05 am

    Hello, I can’t seem to be able to download this. The page freezes when I click on the link from the downloads list, is this normal? has the link expired? has this resource become unavailable?

  28. avatar
    10/07/2014 at 11:26 pm

    It is fo free? I can’t believe, thank you very much. If i wasn’t so poor, i’d donate money for site, but unfortunately..

  29. avatar
    07/07/2014 at 2:28 am

    beautiful

  30. avatar
    07/06/2014 at 10:20 am

    Спасибо большое! Творческих Успехов Вам!

  31. avatar
    30/05/2014 at 2:04 pm

    Thanks Alot! I just started using ZBrush and this will help so much. At this point i’m trying to make a 3d model of my wife.

    • avatar
      01/06/2014 at 9:24 am

      Sounds great! Would love to see the end result if you’re keen to share :)

  32. avatar
    24/05/2014 at 10:30 pm

    omg I LOVE YOU!

  33. avatar
    13/05/2014 at 11:58 pm

    Perfect! thank you!

  34. avatar
    08/05/2014 at 4:53 pm

    Thank you so much ^_^

  35. avatar
    02/05/2014 at 1:11 pm

    This may well be the most beautiful, natural female mesh I’ve ever seen. Thanks..!

  36. avatar
    28/04/2014 at 2:03 pm

    Beautiful proportions thank you !

  37. avatar
    28/04/2014 at 12:45 am

    Cool ! … Thanks man

  38. avatar
    25/04/2014 at 1:53 am

    Nice work, thank you

  39. avatar
    20/04/2014 at 2:53 am

    Gracias tío!

    • avatar
      22/04/2014 at 9:53 am

      Anytime and huge thanks to Eugene for his awesome Base Mesh!!!

  40. avatar
    10/04/2014 at 5:30 am

    Странноватая детализация. Половые губы сделал, а пальцы на ногах, нет.
    И это…может я что-нибудь неправильно импортнул в 3ds max…но, у неё между ягодиц
    находится непонятный кусок геометрии ромбической формы. Просто отдельным элементом.
    ————-
    И, конечно, я благодарен за модельку.

  41. avatar
    28/03/2014 at 4:06 am

    Gracias

  42. avatar
    20/03/2014 at 2:47 am

    BADKING is awesome !!

  43. avatar
    19/03/2014 at 1:27 am

    Started watching BadKing because he’s plain brilliant and has an accent I actually CAN understand. Now, you are my hero good sir. Eugene too, of course!

    Finally a female mesh not suffering from extreme dimorphism…

    • avatar
      19/03/2014 at 7:26 am

      LOL thanks so much mate :) I’m hoping to get some more of my own tutorials out again in a few months!

  44. avatar
    17/03/2014 at 12:48 am

    Nice mesh, so hard to find a female base mesh that isn’t ridiculously stylized

  45. avatar
    14/03/2014 at 9:46 am

    Thank you so much! *high five*

  46. avatar
    09/03/2014 at 10:18 pm

    Great model!Thanks very much!

  47. avatar
    21/02/2014 at 12:43 am

    beautiful mesh!! a beautiful realistic famale body! thank you for uploading this!!!

  48. avatar
    03/02/2014 at 10:51 pm

    thank you

  49. avatar
    23/12/2013 at 5:53 pm

    Thank you very much.

  50. avatar
    13/12/2013 at 3:25 pm

    Thanks!

  51. avatar
    02/12/2013 at 11:33 am

    Thanks guys!

  52. avatar
    10/11/2013 at 1:48 pm

    nice mesh, very nice mesh:)

  53. avatar
    30/10/2013 at 11:25 am

    Downloading as I type, Cant wait to get my digital hands on it….Kinky!! Cheers Eugene for the awesome model and the BK for hosting it!!!!

  54. avatar
    02/10/2013 at 2:53 am

    Grate Mesh i wanted it for animation too bad is useless for animation :(,if some one cold help me with a similar mesh but in T pose i whould be grateful
    Thanks

    • avatar
      02/10/2013 at 7:10 pm

      Is it the topology or the T pose that concerns you?

    • avatar
      02/10/2013 at 10:25 pm

      the t pose,if you use maya or anny other 3d program you will see that the armpit topology intercalate
      therefore is impossible or extremely hard to rig

      • avatar
        02/10/2013 at 11:13 pm

        I’ve updated the download… try now 😉

        • avatar
          04/10/2013 at 12:20 am

          Thaks,Zbrush is not my cup of tea :) btw will you guy’s make a more athletic mesh in the future?

          • avatar
            04/10/2013 at 9:07 pm

            Sure… Why not 😉

  55. avatar
    24/09/2013 at 8:52 pm

    @BadKing:

    Looking forward to it! :)

  56. avatar
    24/09/2013 at 5:28 pm

    Such a great female model. Thanks a lot BK and Eugene! :*

    • avatar
      24/09/2013 at 5:49 pm

      Thanks :) Keep your eye out tomorrow, releasing another female base mesh I’m sure you’ll like.

  57. avatar
    23/09/2013 at 1:18 pm

    Wow! Thank you!

  58. avatar
    18/09/2013 at 12:16 pm

    Thanks Eugene and Bad King – seen Eoff working on his lady for quiet a while, lovely base model with natural face.

  59. avatar
    18/09/2013 at 1:02 am

    Thank you Eugene and Badking !

  60. avatar
    14/09/2013 at 11:03 pm

    Yeah, I do. I have like 7 meshes across the net (obj files) This is indeed good.

  61. avatar
    14/09/2013 at 3:00 am

    Great!!! Nice model

    • avatar
      14/09/2013 at 9:27 pm

      Cheers mate :) It’s great to have some of Eugene’s work in our library!

  62. avatar
    13/09/2013 at 12:58 pm

    Another base mesh to my library, nice!

  63. avatar
    12/09/2013 at 9:59 pm

    much thanks Eugene

  64. avatar
    12/09/2013 at 4:29 am

    Big THANK YOU to Eugene Fokin :) ! And to you Badking 😀 !
    Excellent!

  65. avatar
    11/09/2013 at 8:56 pm

    Soooooooooooooooooooooo thankful to BadKing and Eugene…you guys rock 😛

  66. avatar
    11/09/2013 at 8:04 pm

    Useful base mesh.Thanks !

  67. avatar
    11/09/2013 at 8:41 am

    I know zbrush comes with a few base meshes but I feel like the female ones are lacking. Thank you so much for this beautiful, clean base mesh! I can’t wait to sculpt on it. -jason

    • avatar
      11/09/2013 at 11:06 am

      I’ve been thinking about sculpting a female character for a while, now that I’ve got this it’ll be alot easier! And I get to share it with you guys, extra bonus :) Kudos to Eugene!

  68. avatar
    11/09/2013 at 5:44 am

    Thanks ! :)

    • avatar
      11/09/2013 at 7:29 am

      Cheers! Huge thanks to Eugene for sharing his work with the rest of the community :)

Leave a Reply

You must be logged in to post a comment.

ADDITIONAL INFORMATION
CREATED IN
ZBrush 4R6
SUBDIVISION LEVELS
NONE
POLY COUNT
5,102
POINT COUNT
5,052
TEXTURES
NONE
FORMATS
. ZTL .OBJ
PACKAGE
. ZIP
CONTENTS
2 x OBJ Files   2 x ZTL Files
FILE SIZE
384 KB