Gears, Clamps & Brackets  By Mega Mech Pack

Page 1 of 5 1 2 3 4 5
COST
$0

Gears, Clamps & Brackets

BadKing is giving away this FREE Mech Gears, Clamps & Brackets Brush Set that was created by the BadKing Community as part of our Mega Mech Brush Pack.

This download includes an IMM Brush created for Zbrush 4R6 (compatible with R5) and is made up of 182 individual Mech Parts in addition to the original 182 x .OBJ files and 1 x .ZTL that can be downloaded.

This set contains a variety of Mech parts such as Gears, Rivets, Brackets, Clamps and other Mechanical parts.

Contributing Artists for this Brush Set are as follows: Jerry Perkins, Jesse Barratt and Nuttavut Baiphowongse.

Click here for more information regarding the Mega Mech Brush Pack.

Additional Note: By utilizing the ‘M’ key you can toggle between variations of the Brush Set.

PLEASE NOTE: Files created in a newer version of ZBrush may not be opened by any earlier version of the Software. Click Here for more information.

42 Responses to Gears, Clamps & Brackets By Mega Mech Pack
  1. avatar

    rubendrakkar

    17/06/2016 at 1:10 am

    this is awesome but I got a problem, all the brushes are flipped inside

    • avatar

      BadKing

      20/07/2016 at 6:03 pm

      I’ve just tested the bush and it’s working fine. Check you are NOT using the ‘Alt’ key when applying, also make sure you do NOT have ‘Zsub’ turned on (in the Top Menu), if so switch to ‘Zadd’ instead.
      Hope this helps! 🙂

  2. avatar

    bearmalt

    26/06/2015 at 3:27 pm

    Thank you to Badking and Jerry Perkins, Jesse Barratt and Nuttavut Baiphowongse. Much appreciated.

  3. avatar

    wexaris

    16/06/2015 at 3:25 am

    I am very new to adding brushes, etc. and i don’t know where i have to put the .OBJ files. Please help 🙁

    • avatar

      BadKing

      16/06/2015 at 9:59 am

      If you want to use the OBJ file make sure you have a mesh already open on the canvas (any mesh will do). Go to the “Tool” tab and the “Import” button. Import your .OBJ and it will replace the mesh you have open. Hope this helps 😉

  4. avatar

    Ellen

    26/05/2015 at 2:27 pm

    Thank-you so very much, BadKing!

  5. avatar

    incacavision

    28/04/2015 at 11:43 am

    Thank you for this Generosity..

  6. avatar

    Dransi

    19/04/2015 at 7:17 pm

    thank for all !!!

  7. avatar

    makky08

    09/02/2015 at 2:47 am

    new here thanks to all involved

  8. avatar

    DiceME

    29/12/2014 at 12:25 am

    This is a great resource site,more power to badking and thanks to all the people behind it.

  9. avatar

    ZAKI

    22/11/2014 at 6:13 am

    is this free ? it says 0 usd but no download button :/

    • avatar

      BadKing

      22/11/2014 at 8:34 pm

      You need to click on the red “Add to Cart” button, then click the grey “Go to Cart” button and then click “Proceed to Checkout”. Finally click on the (red) “Place Order” button. You will also receive an email with the download link/s. Hope this helps 🙂

      • avatar

        ZAKI

        26/11/2014 at 12:28 am

        Thanks ! I can donate using the same way right ?

        • avatar

          BadKing

          28/11/2014 at 8:21 am

          Hi mate, we are always after quality donations! If there’s something you could like to share then please let us know 🙂

  10. avatar

    kemor

    15/11/2014 at 7:09 am

    Great and helpful!!! Thanks for that 🙂

  11. avatar

    leonguyen1992

    13/11/2014 at 10:07 pm

    the brush is great
    I have a question arises, how to create a brush like this one, a brush that contains many small objects including mesh, if you have one clip guide is so good, thank you for once brush shared community

    • avatar

      BadKing

      15/11/2014 at 8:38 am

      Hi, Just to confirm do you want to know how to make the brush itself or the small pieces inside the brush?

      • avatar

        leonguyen1992

        15/11/2014 at 11:40 pm

        I have some basicmesh and every time I want to work for zbrush, I have to import them one of the craft, I want in a brush contains basicmesh I’ve done If you know please guide me ,thanks you

        • avatar

          BadKing

          16/11/2014 at 1:52 pm

          I use a Windows machine… this is the path I use to add my brushes to my palette:
          Local Disk (C) > Program Files (x86) > Pixologic > ZBrush 4R6 > ZData > BrushPresets.

          Hope this helps 🙂

  12. avatar

    danubio

    25/10/2014 at 4:15 am

    Thanks!!

  13. avatar

    prot

    15/10/2014 at 4:53 pm

    thankyou very much..

    • avatar

      BadKing

      16/10/2014 at 6:28 am

      You’re absolutely welcome mate but it wouldn’t have been possible without the awesome support from the community!

  14. avatar

    Goku

    12/10/2014 at 9:06 pm

    Great Stuff, Thanks BK!

  15. avatar

    bearmalt

    08/10/2014 at 7:26 pm

    thanks BAdking awesome stuff!!

  16. avatar

    GreyMan

    07/10/2014 at 9:11 am

    Thanks mate, another great addition to the Mech pack.

  17. avatar

    eugoll

    07/10/2014 at 1:30 am

    awesome !!
    Thank you !!

    • avatar

      BadKing

      10/10/2014 at 12:23 pm

      Thanks to Jerry Perkins, Jesse Barratt and Nuttavut Baiphowongse, those guys are great!

Leave a Reply

You must be logged in to post a comment.

Gears, Clamps & Brackets

BadKing is giving away this FREE Mech Gears, Clamps & Brackets Brush Set that was created by the BadKing Community as part of our Mega Mech Brush Pack.

This download includes an IMM Brush created for Zbrush 4R6 (compatible with R5) and is made up of 182 individual Mech Parts in addition to the original 182 x .OBJ files and 1 x .ZTL that can be downloaded.

This set contains a variety of Mech parts such as Gears, Rivets, Brackets, Clamps and other Mechanical parts.

Contributing Artists for this Brush Set are as follows: Jerry Perkins, Jesse Barratt and Nuttavut Baiphowongse.

Click here for more information regarding the Mega Mech Brush Pack.

Additional Note: By utilizing the ‘M’ key you can toggle between variations of the Brush Set.

PLEASE NOTE: Files created in a newer version of ZBrush may not be opened by any earlier version of the Software. Click Here for more information.

42 Responses to Gears, Clamps & Brackets By Mega Mech Pack
  1. avatar

    rubendrakkar

    17/06/2016 at 1:10 am

    this is awesome but I got a problem, all the brushes are flipped inside

    • avatar

      BadKing

      20/07/2016 at 6:03 pm

      I’ve just tested the bush and it’s working fine. Check you are NOT using the ‘Alt’ key when applying, also make sure you do NOT have ‘Zsub’ turned on (in the Top Menu), if so switch to ‘Zadd’ instead.
      Hope this helps! 🙂

  2. avatar

    bearmalt

    26/06/2015 at 3:27 pm

    Thank you to Badking and Jerry Perkins, Jesse Barratt and Nuttavut Baiphowongse. Much appreciated.

  3. avatar

    wexaris

    16/06/2015 at 3:25 am

    I am very new to adding brushes, etc. and i don’t know where i have to put the .OBJ files. Please help 🙁

    • avatar

      BadKing

      16/06/2015 at 9:59 am

      If you want to use the OBJ file make sure you have a mesh already open on the canvas (any mesh will do). Go to the “Tool” tab and the “Import” button. Import your .OBJ and it will replace the mesh you have open. Hope this helps 😉

  4. avatar

    Ellen

    26/05/2015 at 2:27 pm

    Thank-you so very much, BadKing!

  5. avatar

    incacavision

    28/04/2015 at 11:43 am

    Thank you for this Generosity..

  6. avatar

    Dransi

    19/04/2015 at 7:17 pm

    thank for all !!!

  7. avatar

    makky08

    09/02/2015 at 2:47 am

    new here thanks to all involved

  8. avatar

    DiceME

    29/12/2014 at 12:25 am

    This is a great resource site,more power to badking and thanks to all the people behind it.

  9. avatar

    ZAKI

    22/11/2014 at 6:13 am

    is this free ? it says 0 usd but no download button :/

    • avatar

      BadKing

      22/11/2014 at 8:34 pm

      You need to click on the red “Add to Cart” button, then click the grey “Go to Cart” button and then click “Proceed to Checkout”. Finally click on the (red) “Place Order” button. You will also receive an email with the download link/s. Hope this helps 🙂

      • avatar

        ZAKI

        26/11/2014 at 12:28 am

        Thanks ! I can donate using the same way right ?

        • avatar

          BadKing

          28/11/2014 at 8:21 am

          Hi mate, we are always after quality donations! If there’s something you could like to share then please let us know 🙂

  10. avatar

    kemor

    15/11/2014 at 7:09 am

    Great and helpful!!! Thanks for that 🙂

  11. avatar

    leonguyen1992

    13/11/2014 at 10:07 pm

    the brush is great
    I have a question arises, how to create a brush like this one, a brush that contains many small objects including mesh, if you have one clip guide is so good, thank you for once brush shared community

    • avatar

      BadKing

      15/11/2014 at 8:38 am

      Hi, Just to confirm do you want to know how to make the brush itself or the small pieces inside the brush?

      • avatar

        leonguyen1992

        15/11/2014 at 11:40 pm

        I have some basicmesh and every time I want to work for zbrush, I have to import them one of the craft, I want in a brush contains basicmesh I’ve done If you know please guide me ,thanks you

        • avatar

          BadKing

          16/11/2014 at 1:52 pm

          I use a Windows machine… this is the path I use to add my brushes to my palette:
          Local Disk (C) > Program Files (x86) > Pixologic > ZBrush 4R6 > ZData > BrushPresets.

          Hope this helps 🙂

  12. avatar

    danubio

    25/10/2014 at 4:15 am

    Thanks!!

  13. avatar

    prot

    15/10/2014 at 4:53 pm

    thankyou very much..

    • avatar

      BadKing

      16/10/2014 at 6:28 am

      You’re absolutely welcome mate but it wouldn’t have been possible without the awesome support from the community!

  14. avatar

    Goku

    12/10/2014 at 9:06 pm

    Great Stuff, Thanks BK!

  15. avatar

    bearmalt

    08/10/2014 at 7:26 pm

    thanks BAdking awesome stuff!!

  16. avatar

    GreyMan

    07/10/2014 at 9:11 am

    Thanks mate, another great addition to the Mech pack.

  17. avatar

    eugoll

    07/10/2014 at 1:30 am

    awesome !!
    Thank you !!

    • avatar

      BadKing

      10/10/2014 at 12:23 pm

      Thanks to Jerry Perkins, Jesse Barratt and Nuttavut Baiphowongse, those guys are great!

Leave a Reply

You must be logged in to post a comment.

ADDITIONAL INFORMATION
CREATED IN
ZBrush 4R6
POINT COUNT
N/A
POLY COUNT
N/A
FORMATS
ZBP ( Insert Multi Mesh Brush )
TEXTURES
NONE
PACKAGE
. ZIP
CONTENTS
ZBP
FILE SIZE
2.59 MB
ADDITIONAL FILES
CREATED IN
ZBrush 4R6
SUBDIVISION LEVELS
N/A
POLY COUNT
VARYING
POINT COUNT
VARYING
FORMATS
. OBJ . ZTL
TEXTURES
NONE
PACKAGE
. ZIP
CONTENTS
1 x ZBrush Tool   182 x . OBJ Files
FILE SIZE
28.7 MB